Crane Operation Training Services
Tove Leeds provides certified Crane Operations Training for mobile crane operators, tower crane operators, overhead crane drivers, and lifting supervisors across heavy industry and construction sites. As a TVTC-registered Training Centre, we deliver competency-based programs aligned with ASME B30, LEEA, and Saudi regulatory standards across Saudi Arabia, UAE, and GCC markets. Our courses cover crane safety, load chart interpretation, pre-use inspection, slewing operations, and emergency procedures enabling a skilled and compliant crane workforce across oil & gas, construction, and manufacturing sectors.
Mobile Crane Operator Training
Overview: Operator training for safe mobile crane use, pre-use checks, set-up awareness, load chart basics, communication and controlled lifting operations. Training/assessment delivery is aligned with TVTC approval and SASO HERC requirements where the course falls within the approved scope.
Who Should Attend: Mobile crane operators, trainee operators, lifting personnel requiring operator competence verification and site teams involved in crane operations.
Prerequisites: Valid employer authorization, appropriate driving/site access permission where required, medical fitness, PPE, and availability of suitable crane/site conditions for practical assessment.
Learning Outcomes:
- Carry out operator pre-use checks and identify safety-critical defects.
- Understand crane stability, ground conditions, outriggers, rated capacity and load chart basics.
- Operate in coordination with riggers and signal persons.
- Apply safe operating limits, emergency procedures and shutdown controls.
Practical Assessment:
- Pre-use inspection, cab/control familiarization and safety device verification.
- Set-up awareness including outrigger/ground condition checks.
- Controlled lifting, slewing, lowering, load landing and shutdown demonstration.
Limitations: Training does not replace statutory inspection, manufacturer certification, lift plan approval, operator licensing required by authorities, or employer authorization.
How to Book This Course: Contact Tove Leeds to arrange mobile crane operator training for your operators, lifting team or site personnel.
Crane Operator Training
Overview: General crane operator training covering safe operating principles, communication, load movement, parking, isolation and abnormal-condition response. Training/assessment delivery is aligned with TVTC approval and SASO HERC requirements where the course falls within the approved scope.
Who Should Attend: Crane operators, trainee operators and site personnel assigned to operate lifting equipment within approved scope.
Prerequisites: Employer authorization, medical fitness, PPE, ability to understand operating instructions, and access to a suitable crane for practical demonstration.
Learning Outcomes:
- Understand operator responsibilities before, during and after lifting operations.
- Apply safe communication, load movement and landing practices.
- Identify hazards including overhead obstructions, people interface, poor visibility and wind.
- Respond correctly to abnormal conditions, defects and emergency stop requirements.
Practical Assessment:
- Pre-start and functional checks.
- Safe load movement, signal compliance and load landing.
- Emergency stop, parking and isolation demonstration.
Limitations: Only applies to the crane type and scope assessed; it does not authorize operation of other crane categories without separate competence verification.
How to Book This Course: Contact Tove Leeds to arrange crane operator training for your operators, lifting team or site personnel.
Overhead Crane Operator Training
Overview: Training for operators of overhead, gantry and travelling cranes used in workshops, warehouses, production lines and industrial facilities. Training/assessment delivery is aligned with TVTC approval and SASO HERC requirements where the course falls within the approved scope.
Who Should Attend: Overhead crane operators, workshop personnel, warehouse teams, maintenance staff and production employees.
Prerequisites: Employer authorization, site induction, PPE, familiarity with workplace controls and access to an overhead/gantry crane suitable for practical assessment.
Learning Outcomes:
- Perform pre-operational checks on controls, hooks, brakes, ropes/chains and limit devices.
- Operate smooth lifting, traversing and travelling movements.
- Avoid side pulling, shock loading and uncontrolled load swing.
- Safely park, isolate and report defects after use.
Practical Assessment:
- Pre-use check of hoist, controls, hook latch and limit devices.
- Lift, travel, stop, lower and land a load safely.
- Demonstrate anti-sway control, safe parking and isolation.
Limitations: Does not permit side loading, exceeding rated capacity, bypassing limits or using defective lifting accessories.
How to Book This Course: Contact Tove Leeds to arrange overhead crane operator training for your operators, lifting team or site personnel.
Bridge Crane Operator Training
Overview: Practical training for bridge crane operation with emphasis on bridge/trolley/hoist control, load stability, communication and workplace safety. Training/assessment delivery is aligned with TVTC approval and SASO HERC requirements where the course falls within the approved scope.
Who Should Attend: Bridge crane operators, workshop teams and industrial facility personnel using bridge cranes.
Prerequisites: Employer nomination, medical fitness, PPE, knowledge of site traffic/pedestrian controls and access to bridge crane equipment for practical assessment.
Learning Outcomes:
- Verify bridge crane condition before operation.
- Control bridge, trolley and hoist movements safely.
- Coordinate with rigging and floor personnel.
- Recognize unsafe lifting practices and stop-work conditions.
Practical Assessment:
- Conduct pre-use check and functional test.
- Move and land a load under signal/control requirements.
- Identify unsafe practices such as side pulling, overload and poor load attachment.
Limitations: Applies only to assessed bridge crane type and does not replace equipment inspection, maintenance or employer authorization.
How to Book This Course: Contact Tove Leeds to arrange bridge crane operator training for your operators, lifting team or site personnel.
Jib Crane Operator Training
Overview: Training for safe operation of wall-mounted, pillar-mounted and similar jib cranes in workshops, maintenance areas and production environments. Training/assessment delivery is aligned with TVTC approval and SASO HERC requirements where the course falls within the approved scope.
Who Should Attend: Jib crane operators, maintenance teams, workshop staff and production personnel involved in repetitive handling tasks.
Prerequisites: Employer authorization, PPE, basic workplace safety induction and access to jib crane/hoist equipment for practical assessment.
Learning Outcomes:
- Inspect jib crane structure, hoist, hook, controls and travel limits before use.
- Operate within rated capacity and working radius limits.
- Control load swing and avoid contact with structures or people.
- Use safe lifting/lowering methods for routine handling tasks.
Practical Assessment:
- Pre-use check of hoist, hook, controls and swing area.
- Lift, slew and lower a load within the safe working radius.
- Demonstrate safe parking, isolation and defect reporting.
Limitations: Does not allow unauthorized modification, overloading, side pulling or use outside manufacturer instructions.
How to Book This Course: Contact Tove Leeds to arrange jib crane operator training for your operators, lifting team or site personnel.
Tower Crane Operator Training
Overview: Operator training for tower crane activities with focus on communication, operating limits, wind/visibility risks and high-risk construction site conditions. Training/assessment delivery is aligned with TVTC approval and SASO HERC requirements where the course falls within the approved scope.
Who Should Attend: Tower crane operators, trainee operators, lifting supervisors and construction lifting personnel requiring competence verification.
Prerequisites: Employer authorization, medical fitness, site induction, ability to work with radio/signalling systems and access to appropriate tower crane arrangements for assessment.
Learning Outcomes:
- Understand tower crane operating principles and site-specific hazards.
- Coordinate closely with signal persons and lifting teams.
- Manage visibility, wind, working radius and load movement risks.
- Follow emergency, shutdown and reporting procedures.
Practical Assessment:
- Control cabin/remote operation in accordance with signals.
- Demonstrate awareness of load chart/radius, wind limits and blind-lift communication.
- Show safe parking, shutdown and emergency stop procedure.
Limitations: Does not replace tower crane statutory inspection, lift plan approval, appointed person duties or regulatory licensing requirements.
How to Book This Course: Contact Tove Leeds to arrange tower crane operator training for your operators, lifting team or site personnel.
Mobile Harbor Crane Operator Training
Overview: Training for operators working with mobile harbor cranes in port, quay, logistics and marine handling environments. Training/assessment delivery is aligned with TVTC approval and SASO HERC requirements where the course falls within the approved scope.
Who Should Attend: Mobile harbor crane operators, port handling teams, logistics personnel and supervisors involved in marine cargo lifting.
Prerequisites: Employer authorization, port/site induction, medical fitness, PPE, communication ability and access to suitable crane/port work environment for practical verification.
Learning Outcomes:
- Recognize port operation hazards, vessel/quay interface risks and traffic interface.
- Operate with safe load control and communication practices.
- Understand operational limits, stability and environmental factors.
- Apply emergency response, shutdown and reporting procedures.
Practical Assessment:
- Pre-use and functional checks.
- Controlled lifting/handling demonstration under communication control.
- Emergency stop, safe parking and defect reporting.
Limitations: Does not authorize operations outside port procedures, manufacturer limits, vessel/quay controls or employer authorization.
How to Book This Course: Contact Tove Leeds to arrange mobile harbor crane operator training for your operators, lifting team or site personnel.
Disclaimer
- Training confirms participation and assessment against the defined course scope only.
- Training does not replace statutory inspection, employer authorization, site permit, medical fitness, manufacturer instructions or legal licensing requirements.
- Course duration, content and assessment method may vary based on equipment type, site conditions, candidate experience and applicable regulatory requirements.
Precision & Excellence for Every Sector, we serve
Food & Cosmetics
Food safety testing, HACCP certification, quality control and more
Pharmaceutical
GMP compliance, clean room validation, product testing & certification
Oil & Gas
Equipment calibration, pipeline inspection, safety compliance
Manufacturing
Production equipment calibration, ISO certification support
Construction
Material testing, structural inspection, concrete and steel certification
Chemical Industry
Process equipment testing, environmental compliance
Mineral Processing
Mining equipment calibration, ore quality testing and more
Power Sector
Turbine testing, water quality analysis, electrical calibration